Date: 14/09/2011
| Hours flown | Dual | Command | Total |
|---|---|---|---|
| This flight | 2.70 | 0.00 | 2.70 |
| Total to date | 51.2 | 15.2 | 66.4 |
Well, it’s official. I flew my PPL test yesterday and passed with (dare I say it) “flying colours”!
Well, not quite … in fact there were plenty of mistakes, on which I will reflect in this blog post. However, evidently none of them were deal-breakers.
I can’t quite express how happy and satisfied I am at having reached this landmark goal that I’ve held for so long. In fact I think despite 8 months of regular flying I still can’t quite believe I’ve actually done it. For so long, for so many years, being able to fly seemed like an impossible dream. Then opportunity knocked in the form of a TV game show, and all of a sudden it was within reach. Now it’s done.
Perhaps the best way to express my frame of mind today, the morning after, is “quiet but intense satisfaction”.
Now, my customary “long blog post” warning should probably apply from here on in. I don’t know how long this will take, but I’ve got so much to download, this could be fairly lengthy. Totes props to any of you readers who make it to the other end.
Preparing for the flight
I got to the club at 0730 sharp. And I’m very glad I did. Given the packed morning I had (as I’ll relate) before finally getting away at 1245, getting there early and getting the aircraft squared away definitely paid dividends.
I bumped into my instructor, John, who wished me well. The weather looked pretty good – CAVOK conditions – and he asked me where I was going. I told him I didn’t know, and would ask my test officer (our CFI, Bill) when he came in. John opined that I should have called Bill previously to sort this out. Well, I hadn’t (I’ve had a pretty distracting week at work), so I was a little apprehensive at that remark, but not overly so. I had the skeletons of 9 different flight scenarios already pre-planned, at least for the outbound leg. And there are only so many places you can go ex-Bankstown for a 2-3 hour round trip flight. So I figured I was reasonably prepared for whichever way Bill wanted to go.
I grabbed a cup of tea and walked out to the flight line. I was able to spend a relaxed ½ hour with the aircraft, NFR. I called up the fuel truck and while I was waiting, turned on the master switch and checked lights and stall warning indicator. The landing light was out (as had previously been noted on the Maintenance Release) but all good otherwise. Oil was just over the minimum 6 litres, brake fluid reservoir nearly full. All else was good. I then sat in the cockpit and spent 10 minutes re-familiarising myself with the NAV/COM systems so as not to repeat my radio error on my previous flight.
With full fuel on both tanks (and good luck wishes from the fuel guy), I filled a bucket of water and swabbed down the front and side windows, closed the aircraft and headed back to the clubhouse.
Flight planning twice over
As luck would have it, Bill was in the clubhouse when I got back from the flight line. I greeted him and asked him where he’d like to head for the test. Eyeballing the weather, Bill said he’d like to head to Bathurst, then down to Crookwell for some air work and back home via Bindook. I pulled out my flight plan for Bathurst via Warragamba and Katoomba and asked him if that worked – he said yes. So I downloaded the relevant weather reports and spent the next hour developing the full flight plan.
Once done, I checked in with Bill. We started on some of the preliminary paperwork, then I commented that there was still a SIGMET in place indicating possibility of severe turbulence below 6000 feet over and in the lee of the ranges. As it was, winds of up to 35 knots were forecast around the 5000 and 7000 foot levels. After reflecting on this, Bill decided (with my fervent agreement) that perhaps heading across the ranges in a Warrior was not perhaps the best idea for today’s test (downdrafts, anyone?) so we quickly decided on an alternative: Cessnock/Scone via Warnervale. While still windy and somewhat turbulent, the weather looked decidedly better if we stayed east of the Great Dividing Range.
So off I went for another 45 minutes or so of furious flight planning. I was thanking my stars (or more correctly, my pre-test preparation) for the fact that I already had that flight planned out as far as Cessnock, so I wasn’t starting from scratch.
I only had this thought this morning: thank goodness I chose to fly the Cessnock/Scone with diversion scenario as my last dual training flight before the PPL test. I didn’t have to do that last training flight: I could have gone straight to the PPL without it. But had I done so, I would have gone into yesterday’s PPL flight a bit “blind”. I wouldn’t have had the extra experience of flying through the Lane of Entry. I wouldn’t have had the familiarising experience of flying for the Singleton NDB (Non Directional Beacon) and navigating to stay clear of the restricted Dochra military area around Singleton. Nor would I have had the experience of having to divert to and locate the Warkworth aerodrome to the west – which is exactly what eventuated yesterday. So I consider the fees for that last dual cross-country flight as money incredibly well spent.
Ground quiz
The second flight plan finally done, I swallowed hard and approached Bill to say that I was ready.
“Will you walk into my parlour?”, said the Spider to the Fly
Mary Howitt, 1829
Well that’s melodramatic of course – nothing so evil, though it does portray my moderate level of apprehension at that point. We closed the door, sat down, and got into the ground quiz.
What is it about this portion of the practical tests? As was the case with my GFPT ground quiz, I got through it OK, but on several questions I found myself stumbling and on a couple I flat out said, “I don’t know”.
Bill worked his way through the “Knowledge Deficiency Report” that spat out from my PPL theory test and satisfied himself (more or less) that I had adequate knowledge in each of the areas.
- Refuelling precautions? Check – good answer there.
- License privileges? No problems – nailed that one.
- Take-off and landing distance calculations? I’d already had them done and reviewed them with Bill earlier in the morning. No further questions, y’r honour.
- Interpret ARFOR? Fortunately the ARFOR for area 21 was reasonably straightforward. Bill asked me about the validity of a TAF (Terminal Aerodrome Forecast) and I fluffed half of the answer through simple mathematical error but nailed the other half and quickly corrected my error. It was enough to convince Bill I knew was I was talking about. OK, move on, nothing to see here.
- Engine temperature control? Pretty good answer. Pass.
- Pitot static systems? No worries.
- Lift? Man. Try as I did, I just couldn’t seem to understand the gist of the question Bill lobbed at me here. Went around it for 5 minutes or more. Whether he moved on out of pity, or I actually gave him the answer he was seeking, I’m still not sure. Less said the better.
- Visual scanning? Correct technique described, all good.
- Threat & Error Management? Flubbed the actual answer, though I think again Bill was convinced I have a general understanding of the TEM model. Mercy was shown.
A couple of other technical questions which evidently were satisfactorily addressed, and Bill declared stumps. Time to get into the sky.
Getting away: Bankstown to Patonga
The ATIS was information Golf, with takeoffs on 29R to the west, with moderate and gusting variable headwinds with crosswind up to 10 knots. Nothing too arduous. As I walked out to NFR, having signed out and grabbed the flight bag, I thanked myself for having gotten in early and readied the aircraft. All I had to do at this point was the fuel checks (first flight of day and after the morning’s refuel) and another quick walk-around, untying and removing the pitot cover. I opened up the cabin, got my stuff organised and by the time Bill got to the aircraft I felt squared away.
I asked Bill whether he wanted me to demonstrate the aircraft inspection or go through the standard pre-flight passenger brief. He indicated that we could take those as read, so it was straight into the aircraft and into the start-up procedures.
I think Bill liked the look of the little custom-assembled Flight Procedures Manual I’ve put together. I have A5-sized copies of the Bankstown aerodrome map, our club PA28 Cherokee flight procedures, a list of essential radio and NDB frequencies (Bankstown, Camden) and my own custom-developed pre-flight procedures checklist all mounted on cards and filed in a book with plastic sleeved pages. As I pulled it out and ran through the pre-start and post-start checks, I heard a quiet grunt of approval and saw the pencil go to his checklist – so a solid start, I thought. Bill also had a squiz at my flight plan and liked what he saw, at least I didn’t get any challenges about that.
Out onto taxiway Mike 2 and taxi clearance obtained from Ground, I gave Bill a verbal Departure Brief and then pulled into the run-up bay. Run-up and pre-flight checks completed and the Emergency Brief delivered, we taxied for the holding point for runway 29R and held for a couple of minutes for a preceding aircraft to take off. Clearance obtained from Tower, I lined up and we were away.
At 500 feel AGL I turned on to 010M for Parramatta and immediately felt the influence of the moderately strong westerly wind that was to dog me for the entire day. Flying a more or less northerly track for Parramatta, I had to lay off about 20 degrees to the left just to avoid getting blown over into Class C airspace. OK, at least I knew what I was dealing with.
Over the Prospect-Potts Hill pipeline and it was up to 1900 feet over Parramatta. Pretty soon I picked up the Pennant Hills strobe light and was able to track direct for that point. Transponder to 1200 (for class G airspace) and radio to Sydney Centre on 124.55, I commenced a brief climb to 2400 feet and reported just south of Pennant Hills to alert any traffic possibly heading west to the Lane of Entry via Hornsby from the coast. This was a trick I picked up from John in my last dual training flight, and I think Bill liked it.
Conscious of the westerly all the while, I was mildly stressed about finding the right angle of drift to lay off, varying between about 10 and 20 degrees left. Fortunately the various northbound landmarks (M2 interchange, Pennant Hills CBD, the Sands hospital, Thornleigh covered reservoir, Hornsby rail sheds etc) all materialised into view and kept me honest. The only real area of uncertainty for me was north of Hornsby: there’s about a 5-minute period there where you’ve got no more immediate landmarks and you have to trust your flight plan to pop you out correctly over Patonga. As I approached the Hawkesbury River area I sighted Brooklyn Bridge a little too close on my left, indicating that I’d been laying off a little too much drift and was in danger of impinging on the southbound Lane of Entry. I corrected this and made for what I was reasonably sure was – and which turned out to be – Patonga. Phew. First leg done.
Whither Warnervale? And the terminal velocity of apple cores
My next leg was planned to overfly the Warnervale Aerodrome. Over Patonga, I did the standard Time-Twist (heading bug)-Turn procedure, turned for my planned heading for Warnervale and shortly afterwards commenced a climb from 2400 to 7500 feet.
Bill questioned me about the height I was planned to fly to – did I really want to get to 7500? My following track to Cessnock was going to require descending to 6500 feet anyway, why go so high? This conflicted somewhat with the advice I’ve always received from my instructor John – to wit, “height is your friend”. I didn’t feel it was the right time to say, “the Grade 3 instructor who trained me would disagree with you, Bill” so I kind of played a straight bat and continued climbing. Having reached 7500 feet and flown for a few minutes, Bill was kind enough to observe that “at least it’s smoother flying up here” – which it was!
Then came the first glitch of the day. Searching for Warnervale Aerodrome, I started to form the view that I was too far north! And, I think in hindsight, I was also too high to accurately spot the aerodrome.
Bill agreed, and opined that I’d already passed it. Clearly I was so focused on the climb to 7500 feet (during which, in the last 2000 feet or so, climb performance had been woeful due thinner air and my full fuel tanks) that I’d neglected to get my head outside the cockpit enough. A glance to the left and I saw the end of the mountainous area north of Sydney that borders the southern end of the Hunter Valley, confirming that I was already entering into the general vicinity of Cessnock Aerodrome, which was my next destination after Warnervale.
So I decided to cut my losses and head straight for Cessnock. I relayed this decision to Bill, who agreed calmly enough. I changed course and descended to 6500 feet. Bill also commented that our groundspeed had been quite slow (he’d been monitoring the GPS in the cockpit, more on that later) and that as a consequence he’d like to do a few touch-and-goes at Cessnock, rather than overflying direct for Scone per the original plan. OK.
Levelling out at 6500 feet, Bill asked me to crack open the storm window on my side of the cockpit. About 10 minutes earlier he’d pulled an apple out of his pocket and had eaten steadily through it. So I complied, at which point he leaned across and neatly lobbed the core out the window! I was mildly taken aback – though reflecting on this, we were over what looked like unpopulated and bushy territory so there was probably no immediate safety risk to life or property below us. But much as this may have been a habit born of Bill’s (doubtless) thousands of hours of flying, it’s not something I’ll be doing in a hurry. I wouldn’t want to be the unlucky recipient of an apple core to the head from 6500 feet …
Over the ranges and into the Hunter Valley, I informed Bill that I would approach Cessnock Aerodrome on the dead side of the circuit and would descend to 1700 feet to overfly the aerodrome if needs be. Bill commented that while a lot of training material recommends overflying at 1500 feet AGL, this is in fact circuit height for heavy aircraft (jets, RPT etc) and the strictly recommended height is 2000 feet AGL. My question was, how can you see the windsock from that height? Good question, Bill replied! Basically it comes down to conditions and common sense, in Bill’s view – for example, there is no RPT operations around Cessnock that he is “aware of”, and 1500 feet was OK for today.
Down to 1700 feet and approaching Cessnock from the west, I had tuned in to the Cessnock CTAF in an effort to identify which direction the traffic was using. I had intended to overfly the aerodrome and spot the windsock (mainly to show Bill that I was aware of proper procedure), however we heard a couple of transmissions and saw traffic confirming that circuit direction was on runway 35.
So Bill recommended we descend to circuit height and get on with it, which I did quickly, dropping to 1200 feet and joining mid-crosswind. As I did so, I ran through the prelanding checks and saw another box get ticked off on Bill’s worksheet.
Circuits and bumps at Cessnock
First up was a standard landing with 2 stages of flap. Radio calls were fine and so was the approach, though the wind was pretty choppy down low and I was struggling a bit to fly proper square circuit legs. Final approach was fine, though – of course – I had to drop it down hard, having fallen prey to my old bugbear of flaring too early above the runway. Bugger. Oh well, anyway, down we were and then with flaps quickly retracted we were off again. Put it out of the mind and move on.
Second circuit was much better. Managed to fly the legs reasonably square, and I remembered to fly an extended downwind leg as this was to be a flapless landing. In any case, traffic ahead of me was doing the same. On the way in, Bill advised that after this landing we would depart to the north and head for the Singleton NDB.
And fortunately, this one was a greaser! I more or less intentionally managed to keep my speeds 5 or so knots above normal – is as the procedure for a flapless landing in Cherokees – touching down lightly at around 75 KIAS. Much better. Flaps in again, and off we went.
Climbing to circuit height, I levelled out and continued on runway heading for 2 nautical miles, extending the upwind leg so as to depart the area safely. Once clear of the aerodrome, I made a departure radio call, then as per Bill’s instructions set course for the Singleton NDB and commenced a climb to 4500 feet.
Circles over Singleton
As we climbed, Bill took me to task for the way I was flying the aircraft in terms of controlling pitch. I was struggling to reach the Best Rate Of Climb airspeed of around 80 KIAS, and was probably falling into the trap – in my admittedly overanxious state – of chasing the VSI (Vertical Speed Indicator) as it dipped above and below the zero mark in the choppy air.
The gist of what he was communicating to me was that I was failing to use my Attitude Indicator properly. He told me to choose the correct attitude for the climb – in this case about 5 degrees above the horizon I think – then trim it out and leave it alone.
This frankly has not been a big part of my training to date. In the climb, the main instrument I’m used to using is the Airspeed Indicator – making sure I’m at the correct speed (usually around 80 knots BROC), not too fast and definitely not too low, risking a stall. The only time I’ve had to really pay much attention to the Attitude Indicator is during my mandatory 2 hours of instrument flying – under which circumstances the Attitude Indicator becomes all-important.
Bill offered the view that many instructors tend not emphasise the importance of using the Attitude Indicator during PPL training, resulting in the need to breaking “bad habits” when pilots progress to higher levels of training and instrument flying.
Anyway, he was at me about this all the way to the NDB and intermittently for the rest of the flight. I was of course unsure whether this meant black marks against me for not flying within altitude tolerances, or whether it was in a more general sense part of Bill’s approach, which is to instruct in ways that don’t influence the outcomes of the actual check ride. Also he may have been intentionally building up some pressure on me to see how I would perform under a bit of pressure.
A few miles south of the NDB Bill informed me that once past the NDB he wanted me to do a 45-degree of bank steep turn to the left. Oh, great. Just the thing I’d been hoping to avoid having forgotten to practice this manoeuvre on my recent solo flight in the training area.
Well, I’m not sure if it was the accumulated pressure and stress, but quite simply I ballsed up the first attempt. In a nutshell, I didn’t bank past 30 degrees but (as per steep turn procedure) I did open the throttle full wide and consequently found myself over-revving the engine and climbing well outside of desired tolerances for a steep turn.
Bill was not overly pleased with this. Not sure if this was strictly allowed in terms of stepping outside his role, but Bill saw fit to demonstrate a short steep turn to me, driving home again the importance of using the Attitude Indicator to maintain desired pitch.
I humbly (and quickly) asked for a second chance, to which Bill agreed, and this time – thank goodness – I managed a reasonable attempt. I find steep turns a bit of a challenge, and of course while I should really have been observing whether I was maintaining a constant attitude (relative to the real horizon or to the Attitude Indicator), what I was of course watching were my altimeter (to try to avoid climbing or descending too far during the turn) and my Directional Indicator (to try to ensure that I anticipated the roll-out to straight-and-level by 30 degrees or so).
It was a bit up and down, but I pretty much nailed the roll-out on the desired heading and managed to bring it out flat on 4500 feet, from which I’d started the turn. Whether out of eventual satisfaction or despair I can’t be sure, Bill said that would do for now.
Diverting activities: Return to Warkworth
And then – this was where I was so thankful for having done the previous cross-country flight up in the area – Bill said that instead of heading for Scone he would like me to divert to Warkworth. He offered to take the controls while I sorted out maps, headings and so forth.
Fortunately, this took me all of 30 seconds or so. I pulled out my VNC (Visual Navigation Chart), and sketched a quick line from the Singleton NDB to Warkworth Aerodrome. Reading from this line a true heading of about 270 degrees, I subtracted local variance to arrive at an estimated required track of 258 degrees magnetic. And laying my notched pencil over the flight planned track, I quickly estimated about an 8-minute flight to Warkworth.
Resuming the controls, I quickly radioed Brisbane Centre and made my request for a flight plan amendment. This exchange went perfectly, with Bill’s only comment being that I should also have identified myself as a VFR flight.
So, we were off west to Warkworth flying at 4500 feet, with me anxiously searching for the airstrip. Fortunately, I arrived more or less directly overhead the airstrip and was able to identify it quite distinctly from 4500 feet altitude, a good 2000 feet lower than when I’d last been over the area. (Having located the aerodrome a few days previously on Google Maps didn’t hurt, either).
I pointed out the aerodrome to Bill and indicated that I would overfly it before changing course southwards. Bill concurred, and then asked me to prepare a track southbound for the Mount McQuoid NDB.
As it happened, I’d planned the flight assuming a southbound leg from Scone to Warkworth and thence to McQuoid and home, so I already had the required magnetic heading at hand. Therefore over Warkworth it was a simple matter to do Time-Twist-Turn and get sorted out for McQuoid.
Heading home: Instruments, NDB’s and GPS’s
Once established on the southbound track for McQuoid, Bill asked me to hand over the controls and to put on the hood. I hadn’t expected this, but I’ve been quite comfortable with the hood work so far in my training and saw no reason to be scared of it this time around. Bill said that he wanted me to fly on instruments for a few minutes.
So with the hood on, I focused on my Attitude Indicator as the primary instrument, and my other instruments as secondary, and moved into the rather zen-like state (at least that’s the way it seems to me) of relying solely on your instruments. At the PPL level, I believe the goal is to stay within 5 to 10 degrees either side of your desired heading, and within plus or minus 100 feet of your required altitude, all the while of course maintaining a steady desired attitude for straight and level flight, turns, climb or descent as the case may be. Four or five minutes in, evidently this part of the flight was successful and I was allowed to remove the hood and resume visual navigation.
With a good 20 nautical miles or so to go, Bill took the opportunity to quickly demonstrate some of the features of the (rather antiquated) GPS system installed in NFR’s NAV/COM stack. I’d already indicated in conversation earlier in the day that I was keen to get my head around GPS navigation, about which Bill was very supportive as he’s a keen advocate of “use every bit of equipment available to you in the cockpit”. Whereas I think my instructor John is more of the “navigate by dead reckoning” school of thought, at least so far as PPL training is concerned –hence my training has had no GPS content to it.
Didn’t take Bill long to convince me that my next learning step is to get into GPS navigation (as a secondary means of navigation, of course, to back up the traditional methods I’ve learned). For a start, knowing just how far I had to go to reach the NDB was invaluable – no need to guess, you know at any point exactly how many nautical miles away the waypoint is. And further, knowing exactly what my current magnetic track across the ground was, versus the track required to get to McQuoid, took all the guesswork out of chasing the needle on my Automatic Direction Finder. And this was just an old GPS unit – lacking all the fancy features of more recent ones, with on-screen maps and what-have-you.
Once at McQuoid, Bill took the controls while I practised entering our next waypoint – in this case, the NDB at Calga just north of Brooklyn Bridge – into the GPS unit. And bang, there it was. Too easy.
Descending to altitude 3300 feet to be under the 3500 foot control step by the time I reached Calga, I was well set up for the Lane of Entry and well clear of Richmond airspace as well (which had nearly been my nemesis in my previous flight up that way). So note to self: when southbound for the Lane of Entry, use Calga NDB as final waypoint before Brooklyn Bridge!
As we approached Calga, Bill also pointed out to me a region of some cleared spaces on low peaks off to our left, one of which is (apparently) an airstrip at Mangrove Mountain. Useful to know in the event of a forced landing or PS&L scenario, over an area otherwise consisting pretty much of hills and bush.
Anticipating flying down the Lane of Entry and approaching Prospect and Bankstown, I already had my required radio frequencies dialled up and had a sneaky listen to the Bankstown ATIS to find out conditions there. Bankstown was on information Juliet, with landings on 29R to the west and with a crosswind alert. Great, good to know well in advance.
Lane of Entry and the ever-present Richmond restricted airspace
Descending to 2400 feet to be under the control step, I flew over Brooklyn Bridge and made my southbound call to Lane of Entry traffic. Conscious of Richmond to the right, I scanned keenly for the Berowra strobe, which Bill informed me had been inoperative the previous night. (It’s out very frequently, apparently). I was all set to have to visually identify the Berowra township itself and the strobe area just to the southwest, when I saw the strobe and was therefore able to relax a bit and head straight for it.
Once there, I set the required southbound track for the next waypoint – being the strobe on top of the Dural tanks – and started to scan for it. With the westerly wind very stiff now, I had to lay off drift to my right to avoid getting blown left into controlled airspace, and as a result allowed myself to stray a bit too close to Richmond airspace on the right for Bill’s liking. He alerted me to this but was kind enough to allow me to correct the situation – which in any case was not out of control as I’d correctly identified the electricity substation at Galston and was keeping it well clear to my right.
What I hadn’t spotted – until Bill pointed it out to me – was the second strobe flashing quite prominently just out and off to my left. Additional note to self: actively scan when up and down the Lane of Entry. Use my head and neck, lean forwards, don’t allow the windscreen pillars to obscure my vision of important landmarks.
Once the second strobe was reached, it was then a matter of heading south over Castle Hill and visually locating Prospect Reservoir, and descending to the required height of 1500 feet for the Prospect reporting point. I made another check of the ATIS – still on Juliet – and then dialled in the Tower frequency, to monitor local traffic and prepare for contact with the tower.
And it was at this point – though I didn’t realise it until down and parked – that I made my last mistake of the day. And a blood annoying, niggling mistake it was too. I forgot to change my transponder back from 1200 to 3000 once I dialled up tower frequency and approached the Bankstown control zone. Simple mistake, but not a good one to make. Fortunately, this didn’t finish me off as I’d correctly set the transponder when exiting the Bankstown zone at the start of the flight. I reckon Bill put this down to stress of the flight, and let it slide. It pissed me off though: after all the flights on which I’d correctly executed this simple part of the procedure, I had to pick my PPL test flight as the first (and only!) time to forget it.
Reaching the quarry east of Prospect which serves as the reporting point, I reported inbound and was cleared to join downwind for runway 29R and maintain 1500 feet. I turned left and headed for the airfield, searching as I did so for the Dunc Gray Velodrome which now serves as a landmark for GA VFR aircraft approaching runway 29R. I ran through the BUMFISH checks and, once more or less abeam of the velodrome, I reported downwind and was cleared for a visual approach to 29R, being number 1 for the runway.
Down and dusted
Happily, I made a pretty good job of the approach and landing. As I’ve blogged before, I’ve found the quick drop from 1500 feet to circuit height (1000 feet) and then getting set up for approach and landing to 29R a bit of a rushed challenge in the past. But thankfully yesterday it worked out well.
I can’t quite recall my exact sequence of actions (throttle back and nose down, carby heat on, 2 stages of flap) to get down to 1000 feet on time to reach circuit height on late downwind, but the base turn was right on schedule, at the right height and airspeed, and after a bit of initial juggling to get aligned and on the right approach path, I nailed the final landing. Lovely to hear those tires go “chirp” for the CFI on the last lap of the day!
Off the runway and with taxi call made to Ground, I taxyed for parking and ran through my CFROST checks. Bill was asking me why my switches weren’t off yet – not sure if I’d adequately demonstrated to him that I had the right post-landing procedure in hand – but I told him I was using CFROST and he seemed happy enough.
I taxyed very carefully off onto the grass and into parking, ran through the shut-down procedures, and then took one deep, deep breath. I was mentally and physically exhausted! 2.7 hours on an often-choppy PPL check ride, with no break for a stretch, and my right leg had been a bit crampy on the way home. There’s no question but you do plenty of work on a PPL check ride.
So? Did I pass?
Bill started to debrief me on the flight and review the things we’d discussed and he recommended I focus on. Not wanting to interrupt him, I listened patiently for about 10 or 15 minutes, until I could stand it no longer. My gut said I’d probably passed – just – but I needed to hear it one way or the other. So I said, “So, how’d we do here, Bill?” And the bugger just offhandedly looked at me and said, “Oh, yeah, that was alright, you passed” and then grinned at me. He then offered me his hand and congratulated me, and I thanked him – genuinely – for being part of what was one of the proudest days of my life.
Bill tied the plane down and put the cover on the pitot tube while I did the paperwork and squared away the cabin. On the walk back to the clubhouse I was regaled with stories of Bill’s time as a Head Teacher of Aviation Studies with TAFE, in the days when TAFE owned and operated a Beechcraft Baron. Those were the days …
Paperwork, and silly English scenarios
To cap off the afternoon, some CASA paperwork to finalise outcomes of the test and apply for my PPL, and then the last thing that had to be done was an English language proficiency test. This consisted of Bill playing me a couple of audio tracks from his computer, put together apparently by people at CASA and consisting of imaginary “in flight” scenarios and conversations between pilot and air traffic controllers, speaking variously with very heavy, impenetrable “foreign” accents. The gist of the exercise was for me to listen to these scenarios and then describe to Bill exactly what was going on.
Simple enough for me, as a proficient English speaker, though I can see that this would have been a stiff test for those with not proficient with English – which I suppose is the whole point. I had enough trouble listening carefully for 5 or 10 minutes as it was, after the often-arduous flight, but evidently Bill was satisfied. A final handshake and a promise to mail the papers to CASA immediately, and we were done.
Mistakes and things I learned
- Missing Warnervale. I think 7500 feet or so AGL is just too damn high an altitude from which to visually locate a small aerodrome. I had the same challenge when I was trying to locate Warkworth Aerodrome from 6500 feet back in my last dual cross-country flight. Conversely, as I related earlier, I had no problems locating Warkworth yesterday from 4500 feet. (Though admittedly I’d been there before). So my tentative thinking here is: if I’m trying to locate an aerodrome I’ve not previously been to, 4500 feet or so AGL is about the limit from which I can hope to spot it.
- Overflying the aerodrome. Strictly speaking this should be at 2000 feet AGL to avoid circuit traffic at 1500 feet AGL (heavies, RPT etc). But it’s kind of a “common sense and circumstances thing”, according to our club CFI.
- Maintaining desired pitch attitude during flight. Whether you’re climbing or descending, or in straight and level flight, pay attention not just to your attitude as indicated by looking out the window, but also to your Attitude Indicator. If you use the AI to set and maintain the desired pitch attitude, and trim the aircraft properly, you won’t need to chase the needles and should be able to fly effectively “hands off”.
- Use GPS technology where available. Of course, only as a secondary means of navigation. But man oh man, it’s handy.
- Actively scan for the strobes and landmarks on the Lane of Entry. One might be hiding just behind the windscreen pillar and out of your sight if you’re not actively and fully scanning – left, right and forwards.
- Setting the transponder when exiting/entering Bankstown control zone. ALWAYS ALWAYS ALWAYS make the required change to transponder setting at the same time as I change radio frequency, both when exiting Bankstown control zone (radio to 124.55, transponder to 1200) and entering it (radio to 132.8, transponder to 3000). No exceptions.
Reflecting on the journey
So here we are. 8 or so months after my first flight, and with many significant landmarks along the way. Lots of things stand out.
- Making my first really good landing
- My first solo around the aerodrome
- My fourth solo – being first time I had full command of the aircraft from start-up to shut-down
- My first training area solo, free of the Bankstown control zone
- My GFPT – convinced I’d failed!, and
- My first cross-country solo, including a close encounter with a Diamond aircraft in the Wollongong circuit.
All in the space of 8 short months. And here I was – here I am – suddenly having reached the goal that so many have shared over the years since general aviation became accessible to members of the general public. Not to over-romanticise too much, but I do feel as though I’ve joined a very privileged and select group of people: those who are lucky enough to be able to step in an aircraft and “slip the surly bonds of earth”* for a few hours at a time.
* With a nod to John Magee, an American pilot and poet killed in a flying accident while serving in the Battle of Britain. Magee wrote the famous and rather lovely poem High Flight.
Where next? Not sure. Money doesn’t grow on trees, and I don’t know when I’ll next fly. Somewhere in the next 6-8 weeks I guess. Somewhere in the general scheme of things to do next are:
- First flight with my wife (maybe a weekend to Mudgee at some point?)
- Joy flights with family members and friends
- And, hiring John to show me the ropes of the Victor One/Harbour Scenic flights over Sydney.
Plus I also want to get my head around using GPS as an additional navigation tool. And I wouldn’t mind getting a CSU/retractable endorsement in the near-ish future as well.
Whatever lies next, I now have my “license to learn”. Can’t wait for the piece of paper to come in the post …
MidLifePilot's Flying Blog 